Tempered Glass Entrances

Custom Tempered Glass DoorsTempered Glass Doors

ALPHA DOOR & RAIL fabricates custom interior and exterior doors and tempered glass entrances that provide expanded visibility and elegance. Each door is custom made to specifications and is available with a variety of push pulls or panic devices. Various locking systems are also available which include centerlock housings, bottom rail mortise locks or electric magnetic locks. Entrance systems can include custom sidelites, transoms and stabilizing fins.

Ask about our Electric Glass options.

View our photo gallery of completed projects and sample drawings below. Please contact Fred@alphadoorandrail.comor Rick@alphadoorandrail.com for more information or a quote.

Below are some of our typical door types and details. Rail, patches, styles, cladding, pulls, and glass can all be customized to create the style of door you are looking for.

Door Types
Tempered Glass Door Styles
Style “P” Continuous Top and Bottom Rails

View PDF Drawing

Style “BP” Top Corner Patch with Bottom Rail

View PDF Drawing

Style “B” Patches at Top and Bottom Pivot Corners

View PDF Drawing

Style “F” Patches at Top and Bottom and One Leading Corner

View PDF Drawing

WS Door

View PDF Drawing

Rails and Stiles

View pdf

Rail Sizes

From 1¾” x 3½” up to 1¾” x 12”. Alpha Door and Rail Inc.’s standard rail size is 1¾” x 4”. All rails can be used in number of different combinations of continuous and patch (corner) rails. Rails are made of extruded aluminum with cladding if required and with removable endcaps to match the specified finish. Rails are typical to Type P, BP and WS doors

Stile Details

Aluminum door stile runs the height of the door and ties into the top and bottom rails. Stiles are typical to type WS doors.

Patch Fittings

View pdf

Top and Bottom Patches
Our top and bottom patches measure 6 7/16” x 2”. They are designed to work with various overhead and floor closers as well 3/8” and ½” glass. They are available in stainless steel, brass, and anodized finishes. Patch fittings are typical to Type BP, B and F doors.

SIDELITE/TRANSOM FITTING
affordable Tempered Glass Entrances texas
SIDELITE/TRANSOM/FIN FITTING

The tempered glass used in Alpha Door & Rail, Inc.’s doors and sidelights is horizontally tempered to eliminate tong marks and distortion. Tempered glass must be prepared for notches and holes prior to tempering. No attempts to alter the glass size or drill holes should be made after tempering. Every exposed edge has a flat polish.

Glass is available in ½” or 3/8” clear, bronze or gray and ¾” clear tempered.

All glass is fabricated in strict accordance with Federal Specifications: 16 CFR 1201, Category 11, ANSI-Z97.1-1975, ASTM C1048-85.

Finishes
cheap Tempered Glass Entrances

View pdf

Specifications & Information

Alpha Door & Rail offers a variety of hardware for any design or look you want to achieve. Including:

  • Overhead or floor closers
  • Pivots
  • Thresholds
  • Push/Pulls
  • Locks and Cylinders
  • Dustproof strikes
  • Electric Releases
  • Panic Devices

Contact Fred@alphadoorandrail.com or Rick@alphadoorandrail.com for all the options available.

Door Sizes and Glass Tolerances

  • Doors up to 10’ high can be fabricated to your specifications.
  • Doors are manufactured plus 1/16” and minus 1/8” of the actual overall size of the doors ordered.
  • Thickness size is +1/32”
  • Warpage tolerance is in accordance with Federal Specifications DD-G-1403B.

Door Specifications

Also check: Hollow Metal Frames in Texas